A customer in Kazakhstan purchased six standard HIXEN HX4007 telehandlers in three batches for winter snow clearing and work throughout the year. The buyer selected one machine model and ordered attachments for different tasks, from clearing snow to loading materials and maintaining outdoor areas.
Snow clearing was a priority for the customer in Kazakhstan. The buyer needed equipment for several kinds of winter work, including pushing accumulated snow aside, sweeping the snow left on hard surfaces and moving deeper accumulations away from the work area. Each job called for a different attachment.
The customer also wanted to put the fleet to work beyond winter. The telehandlers needed to support material loading, lifting and grounds maintenance when snow clearing was no longer required. Because the purchase covered six machines, the buyer also needed a way to coordinate equipment selection and transport across multiple batches. The choice therefore involved the machine model, the attachment package and the shipment plan.
The customer also paid particular attention to engine configuration. Dust, feed particles, moisture and silage residue were relevant to the working environment. The farm considered these requirements when comparing bids from several suppliers.
HIXEN configured the order around six standard HX4007 telehandlers and selected the attachments according to the customer’s work. The base machine stayed consistent across the order. The customer could then choose the attachment that suited the job, whether the task was moving snow, handling bulk materials or maintaining outdoor areas.
The customer purchased the six units in three batches. This gave HIXEN and the customer separate dispatch points for coordinating the machines and attachments with the transport arrangements for each batch. The attachment package covered three snow clearing methods and four additional work applications, giving the buyer a way to plan how the same machine model could serve different tasks across the year.
The customer selected three snow clearing attachments for the HX4007 order. The choice of attachment depends on the amount of snow, the surface being cleared and where the snow needs to go.
The snow plow pushes accumulated snow to the side of a travel route or towards a designated collection area. It was selected for tasks such as clearing access roads, parking areas and open yards where there is room to move snow aside.
The snow sweeper uses a rotating brush to clear snow left on paved or other hard surfaces. It suits areas where the customer needs to clear a lighter layer of snow or sweep the surface after an initial plowing pass.
The snow blower collects snow and discharges it away from the cleared area. It was selected for deeper accumulations and areas where the snow needs to be moved away from the work zone.
The customer added four other attachments to cover tasks that continue after snow clearing season. These were part of the Kazakhstan order, with each attachment selected for a different kind of work.
| المعلمة | HX4007 Specification |
|---|---|
| Rated load capacity | 4,000 kg |
| Maximum lift height | 7.0 م |
| Maximum forward reach | 3.6 م |
| الطول الإجمالي للنقل | 4.65 م |
| Overall length to fork face | 5.87 م |
| العرض الكلي | 2.2 m |
| الارتفاع الكلي | 2.55 m |
| قاعدة العجلات | 3.15 m |
| Ground clearance | 0.35 m |
| Unladen weight with forks | 8,100 kg |
The six HX4007 telehandlers were dispatched from China to Kazakhstan in three batches using a combination of road and rail freight. HIXEN planned transport around the customer’s destination, the number of machines and the dispatch arrangements for the separate batches. The team prepared the equipment for shipment and coordinated loading and transport according to the arrangements for each batch.
For a similar fleet order, share the final destination, the total number of units, the attachment list and any preferred delivery sequence. These details help HIXEN review transport options and discuss whether separate dispatches would suit your receiving schedule. The route and timing can then be confirmed for each shipment.
Tell us how many machines you need, where they will work and what you want each one to handle. For snow clearing, describe the surfaces, typical snow conditions and where the cleared snow can be placed. For lifting or loading, provide the load weight, placement height and forward reach. Include any requirements for mowing, site maintenance or other attachments you want us to review.
Share your delivery destination and whether you prefer one shipment or separate batches. HIXEN can review the base machine, attachment package and transport arrangements with you and prepare a quote based on the configuration and quantities you need.
For a similar fleet order, share the final destination, the total number of units, the attachment list and any preferred delivery sequence. These details help HIXEN review transport options and discuss whether separate dispatches would suit your receiving schedule. The route and timing can then be confirmed for each shipment.
Compare HIXEN telehandlers by rated capacity and lift height to find a model that suits the loads and working areas on your farm.
