The HIXEN Telehandler Winch is a hydraulic attachment for raising and lowering suspended materials from a compatible telehandler. A powered drum winds the steel wire rope to lift the hook and pays it out to lower the load. This gives crews vertical hook travel at an approved boom position, which can be useful when setting equipment on a base, lowering a component into place or handling an item with rated lifting points.
HIXEN offers 1, 2, 3 and 4 metric ton winch options with 37 m of steel wire rope as standard. Choose the winch together with the carrier and the planned lift. The working limit of the assembled setup depends on its approved configuration and load chart.

| Spécification | Détails |
|---|---|
| Attachment type | Hydraulic winch for suspended materials |
| Winch capacity options | 1 t, 2 t, 3 t or 4 t (metric tons) |
| Standard wire rope | 37 m steel wire rope |
| Mounting interface | Confirm for the telehandler carriage and model |
| Hydraulic requirements and rope configuration | Confirm for the selected winch and carrier |
For a configuration review, provide the total suspended weight, including the rigging, along with the intended pick and set points. Forward reach means the horizontal distance involved in the lift. Include it even if the machine will lift only a short distance vertically, since the permitted load can change as the boom extends.
Browse HIXEN’s construction telehandlers if you are sourcing the carrier and winch together. The job’s reach, clearance and stabilizer requirements help determine which machine configuration to review.
Describe the load path from pickup to placement. Include any obstacle the load must clear and how far the hook must travel below the boom head. These details help HIXEN check the available hook travel and identify the load chart for the proposed machine and winch combination.
For a fleet order, list each carrier model and carriage type. If the winch will move between machines, confirm compatibility and obtain the applicable documentation for each pairing.
Can a 4 t winch lift 4 t at full boom reach?
The allowable load comes from the approved suspended-load chart for the specific machine and attachment configuration. Check the planned boom position, stabilizer configuration and applicable rigging limits to establish the allowed load.
Does 37 m of rope give 37 m of hook travel?
The figure describes the supplied steel wire rope. Confirm the available hook travel for the selected setup, including the rope arrangement and the minimum wraps specified for the drum.
Will the winch fit my existing telehandler?
Send the make, model and a photo of the carriage or quick coupler. If available, include the auxiliary hydraulic flow and pressure specifications. HIXEN can use those details to review fit and identify the applicable documentation.
How does a winch compare with a fixed lifting hook?
A fixed hook moves with the boom. A winch adds powered rope movement for a job that calls for vertical hook travel. Compare both configurations in the HIXEN telehandler attachments range.
Contact HIXEN Machinery for a quote and compatibility review. Send your telehandler model, carriage photo, total suspended weight, lift height, forward reach and required hook travel. Include your destination and quantity so the quote can cover the proposed configuration.