HIXEN HX3510 telehandler for sale

The HIXEN HX3510 is built for jobs where a delivery truck can get close to the site, but the materials still need to go farther or higher. Its three-section boom reaches up to 10 m vertically and 6.4 m forward, giving crews more flexibility when feeding raised work areas or placing pallets beyond the unloading point. With a maximum lift capacity of 3,500 kg and a body 2.20 m wide, it suits construction sites, agricultural yards, and equipment fleets that need reach within limited access routes. Four-wheel drive supports travel between work areas, while interchangeable attachments let you configure the machine around the materials you handle. Order directly from HIXEN with the engine, drivetrain, and equipment options your market requires.

HX3510 telehandler Advantages

  • Reach raised work areas from ground level. Use the three-section boom to feed palletized materials to raised decks or loading points. If the machine needs to stand away from the landing area, check the required height and horizontal reach together when sizing the lift.
  • Reach across a staging area. Up to 6.4 m of forward reach gives crews more placement options where a material stack or the site layout limits how close they can approach. This is especially useful when the truck unloading point and the final placement point are in different parts of the site.
  • Plan heavier lifts with the stabilizers lowered. The HX3510 has separate fork load charts for operation on tires with the levelling device and operation with the stabilizers lowered. The lowered-stabilizer chart includes a 3,500 kg zone. Use the chart that matches your setup to check capacity at the required boom position.
  • Take material from the truck to the work area. Four-wheel drive and 350 mm of ground clearance suit routes across gravel yards and unpaved staging areas. The 2.20 m width and 4.25 m external turning radius give you dimensions to check against gates, truck approaches, and space between stored materials.
  • See around the machine during loading. Rear and front-right cameras display their views on a 10-inch screen. LED work lights illuminate the working area during early starts or in dim loading bays. The FOPS Level 2 cab helps protect the operator from falling objects.

HX3510 Standard Equipment and Options

Standard Equipment :

  • Engine and travel system. A 77.3 kW Yuchai China Stage II diesel engine, electronically controlled travel, and a torque-converter transmission with four forward and four reverse gears.
  • Boom and tires. A three-section telescopic boom and 16/70-20 pneumatic tires.
  • Operator cab. An adjustable seat and steering column, instrument panel, and rear sliding window.
  • Visibility and emergency equipment. LED work lights, rear and front-right cameras with a 10-inch display, an emergency escape hammer, and a fire extinguisher.

Optional Equipment :

  • Engine and emissions configurations. Ask about China Stage II, EU Stage IIIA, EU Stage V, or U.S. EPA Tier 4 Final engine options. Share the destination country and required emissions standard so HIXEN can confirm the engine and supporting documents for your order.
  • Hydrostatic transmission. Choose a China-made or Danfoss closed-loop hydrostatic drive if your application or fleet specification calls for one.
  • Axle and tire options. Ask about a ZF-type wet-brake axle or solid tires. Tell us about your typical ground conditions and travel routes so we can review the proposed setup.
  • Cold-weather cab options. Specify an electrically adjustable heated seat, a diesel-fired cab heater, or both for machines that regularly work in cold conditions.

HX3510 Technical Specifications

ParameterSpecificatie
Maximum lift capacity3,500 kg
Maximum lift height10.0 m
Maximum forward reach6.4 m
BoomThree-section telescopic boom
Overall length to carriage5.80 m
Overall width2.20 m
Overall height2.55 m
Wielbasis3.15 m
Ground clearance350 mm
External turning radius over tires4.25 m
Unladen weight with forks9,500 kg
Fork dimensions1,220 × 125 × 50 mm
Standard tires16/70-20 pneumatic
Standard engineYuchai YCD4M22T-105
Rated engine power77.3 kW
Standard transmissionTorque converter
DriveFour-wheel drive
Maximum travel speed35 km/h

telehandler Attachments

HIXEN supplies pallet forks for unit loads, buckets for loose materials, bale clamps for agricultural work, and lifting jibs for compatible suspended loads. Tell us what you handle and how much it weighs. We can recommend an attachment size, check mounting and hydraulic compatibility, and identify the applicable load chart.

HX3510 Container Loading

A 20GP container takes one standard HX3510 with all four tires, the cab guard, and the quick coupler removed. A 40HC container takes two standard units without that disassembly. Send your order quantity, destination port, and attachment list so HIXEN can confirm the loading plan and quote freight for your order.

Get a Factory-Direct HX3510 Quote

Tell us where the machine will work and what it needs to lift. Include your destination country or port, order quantity, heaviest load, required lift height and forward reach, and preferred attachments. If your work area has a restricted entrance or the machine must stand back from the landing point, include a photo or site drawing with dimensions. We can review the job and quote the machine, options, and shipping together.

Veelgestelde vragen

Can the HX3510 lift 3,500 kg to 10 m?
The 3,500 kg maximum applies within the marked zone on the fork chart with the stabilizers lowered. For a lift near 10 m, check the capacity at your exact height and forward reach using the chart for the fitted attachment, load center, and machine setup.

Can I use a bucket or forks I already own?
Send the attachment model, weight, and mounting dimensions or photos of the connection points. For a powered attachment, include its hydraulic flow and pressure requirements. HIXEN can review compatibility before you finalize the order.

How much does the HX3510 cost?
The quote depends on the engine, drivetrain, selected attachments, order quantity, and delivery terms. Share your preferred configuration and port so HIXEN can quote the build and freight for your order.

Can I buy replacement parts with the machine?
Yes. Ask HIXEN to include maintenance and wear parts such as filters, seal kits, and hoses. Dealers can also request a recommended parts list when placing an initial order.

Stuur vandaag nog uw aanvraag

Stuur vandaag nog uw aanvraag

Stuur vandaag nog uw aanvraag