HIXEN HX5010 telescopic telehandler

The HIXEN HX5010 is a heavy-duty telescopic telehandler for crews that unload trucks, move dense palletized materials, and feed raised work areas throughout the day. Its two-section boom reaches up to 9.8 m vertically and 5.4 m forward, with a maximum lift capacity of 5,000 kg within the applicable load chart. This combination suits many low-rise construction projects, including buildings of around three stories where actual landing heights and setbacks fall within the machine’s working range. A 91 kW Yuchai diesel engine and four-wheel drive support daily work across construction sites, industrial yards, and agricultural facilities.

Why Choose the HX5010 for Heavy Material Handling?

  • Power and hydraulics for repeated loading cycles. The 91 kW Yuchai diesel engine delivers 400 Nm of maximum torque at 1,400 rpm. The torque-converter transmission supports repeated forward and reverse travel between trucks and storage areas, while the gear-pump hydraulic system powers boom lift and extension. If you use a powered attachment, HIXEN can check the hydraulic flow and pressure it requires against the proposed setup.
  • Two load charts for heavy picks. The HX5010 has separate fork load charts for operation on tires with the levelling device and with the stabilizers lowered. The charts show how available capacity changes with boom position and how lowering the stabilizers changes the working range. Use the chart for your setup to check a heavy pallet at its actual placement height and reach.
  • A practical balance of lifting height and purchase cost. The HX5010 is a good value choice in the HIXEN 5-ton range when most of your work is truck unloading, moving heavy stock, and supplying low-rise construction. Start with the heaviest load you need to place and measure its landing height and setback. If those lifts fit the working range, the 10 m class gives you the reach your crews will use regularly.
  • Traction and clearance for mixed site surfaces. Four-wheel drive and 380 mm of ground clearance suit gravel yards, compacted soil, and unpaved routes between staging areas. At 2.35 m wide, the machine has a 4.10 m external turning radius over the tires. Use both figures to check delivery gates and turning areas, with room for the attachment and load.
  • Visibility around trucks and stock. Rear and front-right cameras feed a 10-inch cab display, helping operators check around the machine when reversing or maneuvering. LED work lights illuminate dim loading areas, and the FOPS Level 2 cab helps protect the operator from falling objects.

HX5010 Technical Specifications

范围规格
最大起重能力5,000 kg
最大举升高度9.8 m
最大前伸距离5.4 m
繁荣Two-section telescopic boom
至货叉架的总长度6.40米
总宽度2.35米
整体高度2.55米
轴距3.60米
离地间隙380毫米
轮胎外转弯半径4.10米
带货叉的空载重量12,800 kg
货叉尺寸1,220 × 125 × 50 毫米
标准发动机Yuchai YCD4J22T-125
发动机额定功率91 kW
Maximum engine torque400 Nm at 1,400 rpm
标准传输变矩器、四个前进档和四个倒档
Hydraulic pumpGear pump
驾驶四轮驱动
最大行驶速度40公里/小时

HX5010 Optional Configurations

  • 发动机和排放套件。 Ask about China Stage II, EU Stage IIIA, EU Stage V, or U.S. EPA Tier 4 Final engine configurations. Include your destination country and required emissions standard so we can confirm the available engine and documentation.
  • 闭环静液压传动。 Choose a China-made or Danfoss hydrostatic drive if your fleet calls for one or your work involves frequent low-speed positioning. HIXEN can confirm the available drivetrain combinations for your order.
  • ZF型湿式制动车桥。 Ask about this option when specifying the axle and braking package for your fleet. Include your preferred transmission so we can confirm the proposed combination.
  • 柴油驾驶室加热器。 Add a fuel-fired heater if the machine regularly works in cold climates or starts shifts before temperatures rise.

伸缩臂叉装机附件

HIXEN supplies pallet forks for packaged loads, buckets for loose material, bale clamps for farm work, and lifting jibs for compatible suspended loads. Tell us what you handle, its weight and dimensions, and where it needs to go. We can recommend an attachment and confirm the mounting requirements and applicable load chart.

Get a Factory-Direct HX5010 Quote

向我们发送您的 destination country or port, order quantity, heaviest load, landing height, forward reach, and preferred attachments. For a low-rise project, add a photo or drawing that shows where the machine can stand and where the load needs to land. HIXEN can review the lift and quote the machine, factory options, and shipping together.

常见问题解答

Can the HX5010 lift 5,000 kg to its maximum height?
The 5,000 kg rating applies within the marked capacity zone for the machine setup. For a high lift, check the exact height, forward reach, load center, and attachment against the applicable chart. Ask HIXEN for the chart that matches your quoted configuration.

Can the HX5010 reach the third floor?
It can suit some three-story projects. Floor heights and site setbacks vary, so measure from the machine’s standing surface to the point where the load will be placed. A raised landing may be within vertical reach while the required setback still limits the usable capacity.

Should I choose the HX5010 or HX5014?
Both have a 5,000 kg maximum lift capacity. The HX5010 reaches up to 9.8 m vertically, while the HX5014 reaches up to 13.8 m. Compare their load charts at your actual working height and reach, then request quotes for the same engine and attachment requirements. HIXEN 5-ton telehandler range

我可以订购机器的备件吗?
Yes. Ask HIXEN to include a maintenance and wear parts package with your quote. Available items include filters, seal kits, and hoses. Dealers can also request a recommended parts list for local stock.

立即发送您的询盘

立即发送您的询盘

立即发送您的询盘