联系
联系

HIXEN HX5014 Telescopic Handler

The HIXEN HX5014 is a heavy-duty telescopic handler for moving palletized building materials, unloading trucks, and placing loads at elevated work areas. Its three-section boom reaches a maximum lift height of 13.8 m and a maximum forward reach of 9.46 m. With the stabilizers lowered, the fork load chart shows a 5,000 kg lifting zone that extends above 12 m at short forward reach. Four-wheel drive and three steering modes help crews position the machine around trucks, material stacks, and structures.

  • High-level material placement. A 14 m class boom gives crews the reach to deliver materials to elevated landing points.
  • 5-ton lifting capacity. Handle loads up to 5,000 kg within the rated zone for your setup.
  • Engine and equipment options. Specify the emissions package, drivetrain options, and attachments for your market.
  • Factory direct ordering. Get a quote for the machine, options, and shipping from HIXEN.
获取 HX5014 报价

Why Choose the HX5014 Telescopic Handler?

  • Reach elevated work areas from ground level. The 13.8 m maximum lift height suits jobs such as feeding palletized materials to upper floors or placing supplies onto raised loading areas. When the machine must stand back from the landing point, check the required height and horizontal reach together.
  • Retain lifting capacity at height. With forks and the stabilizers lowered, the 5,000 kg zone extends above 12 m at short forward reach. This matters when you need to place a heavy pallet at height. Capacity changes as the boom extends, so use the chart for the attachment, load center, and stabilizer setup.
  • Work from farther back. Up to 9.46 m of forward reach helps when a material stack or site layout limits how close the machine can approach. Share the setback and landing height so HIXEN can help check the load you need to place from that position.
  • Power and hydraulics for repeated handling. A 91 kW Yuchai diesel engine, torque-converter transmission, and gear-pump hydraulic system support work that alternates between unloading, traveling, and positioning materials. For powered attachments, ask HIXEN to confirm the hydraulic requirements for the selected setup.

Four-Wheel Drive and Three Steering Modes

Four-wheel drive and 380 mm of ground clearance suit sites where the route from the delivery truck to the placement point crosses gravel, compacted soil, or unpaved yard surfaces. Three steering modes help the operator adapt as the available space changes. HIXEN HX5014 steering and drive specifications

  • Front-wheel steering suits general travel along open site lanes and between staging areas.
  • Four-wheel steering helps the machine make tighter turns around stockpiles, between storage rows, or near a delivery truck.
  • Crab steering moves the machine diagonally when the operator needs to adjust its position alongside a wall, loading bay, or row of pallets.

HX5014 Technical Specifications

范围规格
Maximum lift capacity5,000 kg
最大举升高度13.8米
最大前伸距离9.46 m
Boom三节伸缩臂
至车厢总长度6.60 m
至货叉面的长度7.82米
总宽度2.35米
整体高度2.55米
轴距3.60 m
离地间隙380 mm
External turning radius over tires4.10 m
带货叉的空载重量13,600 kg
Fork dimensions1,220 × 125 × 50 mm
Standard engineYuchai YCD4J22T-125
Rated engine power91 kW
Standard transmissionTorque converter
Drive四轮驱动
Maximum travel speed40公里/小时

Standard Equipment and Options

Standard equipment

  • Engine and boom. A 91 kW Yuchai China Stage II diesel engine, electronically controlled travel system, and three-section telescopic boom.
  • Operator cab. A FOPS Level 2 cab with an electrically adjustable heated seat, adjustable steering column, and rear sliding window.
  • Visibility and emergency equipment. LED work lights, rear and front-right cameras with a 10-inch display, an emergency escape hammer, and a fire extinguisher.
  • Tires and braking. Tubeless radial tires and oil-immersed multi-disc service brakes on the front and rear axles.

Optional equipment

  • Engine and emissions configurations. Ask about China Stage II, EU Stage IIIA, EU Stage V, or U.S. EPA Tier 4 Final. Share your destination country so HIXEN can confirm the engine and documentation available for your order.
  • Closed-loop hydrostatic transmission. Choose a China-made or Danfoss system when your fleet or application calls for a hydrostatic drive.
  • Wet-brake axle option. Ask about a ZF-type wet-brake axle when specifying the drivetrain.
  • Diesel-fired cab heater. Add a fuel-fired heater for machines that regularly work in cold climates.

Telehandler Attachments

HIXEN supplies pallet forks, buckets, bale clamps, pipe grapples, and lifting jibs for the telehandler. Share your material type and load dimensions so we can recommend an attachment and confirm the applicable load chart together.

常见问题解答

Can the HX5014 lift 5,000 kg to 13.8 m?
The 5,000 kg rating applies within the marked zone on the load chart. With forks and the stabilizers lowered, that zone extends above 12 m at short reach. For a lift near maximum height, check capacity at your exact placement height and forward reach.

Which load chart should I use?
HIXEN provides separate fork load charts for operation on tires with the levelling device and operation with the stabilizers lowered. Ask for the chart that matches your machine setup and fitted attachment.

Can I order the HX5014 with my own colors and branding?
Yes. Share your paint color reference, logo artwork, and order quantity. HIXEN can confirm available finishes and branding placement along with the engine, drivetrain, and attachment options in your quote.

Can I order wear parts with the machine?
Yes. Ask for a parts package with your HX5014. HIXEN supplies routine maintenance and replacement items such as filters, seal kits, and hoses. Dealers can request a recommended parts list for local stock.

about shipping

HIXEN can pack one standard HX5014 in a 40HC container with the cab guard removed for transport. Share your destination port and attachment list for a packing plan and quote.

Get a Factory-Direct HX5014 Quote

Send your destination country or port, order quantity, heaviest load, required lift height and forward reach, and preferred attachments. If you need to reach a raised deck or work from behind a setback, include a photo or drawing with dimensions. HIXEN can review the lift and quote the machine, selected options, and shipping together.

立即发送您的询盘

立即发送您的询盘

立即发送您的询盘