A construction contractor in Russia uses the HIXEN HX5014 telehandler for daily material handling on building projects. Winter temperatures at the site can fall to around minus 40 degrees Celsius, so the contractor considered cold starts and coolant protection when specifying the machine. The order paired the HX5014 with a Cummins engine and coolant rated to minus 40 degrees Celsius. The contractor also added a light material bucket for clearing snow from work areas and access roads. The telehandler serves two recurring site needs, moving materials during construction and clearing snow from areas the crew needs to access throughout winter.
The contractor needed a telehandler that could handle daily lifting and material movement while crews worked through the winter. Starting the machine in cold conditions was a concern, along with coolant freeze protection and the effect of low temperatures on operating fluids. The buyer therefore needed to consider the engine and cooling system alongside the weight and placement of typical loads.
Snow clearing was another requirement. The contractor wanted to use the same machine to clear snow from work areas and access roads when needed. That made attachment selection part of the purchase decision. The chosen setup had to support the primary handling work while giving the crew a practical way to deal with snow on site.
Why the Standard HX4018 Fit the Job
HIXEN supplied an HX5014 with a Cummins engine and coolant rated to −40°C. These were the engine and coolant selections recorded for this order. The coolant rating describes the coolant itself. The machine’s permitted operating conditions and starting procedures should be checked against the documentation for the specific configuration.
The order also included a light material bucket for moving snow. That attachment gave the contractor a way to use the HX5014 for clearing work areas and access roads alongside its normal material handling duties. The configuration addressed two separate questions for the buyer. The first was how to specify the machine for winter conditions. The second was what equipment the crew needed to handle snow on the site.
The HX4018 has a rated load capacity of 4 tonnes and a maximum lift height of 18 metres. For buyers comparing machines for similar farm work, start with the heaviest load you handle, the height at which it must be placed and the forward reach required. Use the load chart for the proposed configuration to check each lift.
A winter telehandler order starts with the site conditions and the work the machine will do. Share the lowest temperatures you expect, whether the machine will be stored indoors or outdoors, and when crews typically need to start work. These details help define what to review with HIXEN when discussing the engine, fluids and operating requirements for your order.
Then list the handling tasks separately. For lifting, provide the typical load weight, required placement height and forward reach. If you also need to clear snow, describe the areas you need to keep accessible and the attachment you have in mind. HIXEN can review these requirements with you and confirm the proposed configuration before you place an order.
| Configuration Item | Specification for This Order | Relevance to the Project |
|---|---|---|
| Telehandler model | HIXEN HX5014 | The contractor selected this model for daily material handling and site work on building projects. |
| Engine | Cummins engine, specified as Euro III for this order | Engine selection formed part of the contractor’s review of the machine for winter work. |
| Coolant | Antifreeze coolant rated to −40°C | The coolant specification addressed freeze protection in the cooling system for the project. |
| Attachment | Light material bucket, also referred to as a grain bucket | The contractor uses this attachment to clear snow from work areas and access roads. |
| Main duties | Material handling and snow clearing | The selected setup gives the contractor two uses for the same telehandler across the construction site. |
Daily construction material handling. The contractor uses the HX5014 to move and lift materials on building projects. The machine’s primary role is to support routine handling work around the site. On a similar project, the type of material and where it needs to be placed will determine the appropriate attachment and whether the lift falls within the machine’s load chart.
Snow clearing with a light material bucket. The contractor also uses the HX5014 to clear snow from work areas and access roads. This gives the machine a second role when snowfall affects access around the site. The bucket was selected for this purpose as part of the order, alongside the engine and coolant specifications for winter work.
Tell us what your crew needs the telehandler to do and what conditions it will work in. We can use those details to review the proposed machine and attachment setup with you before preparing a quote.
Compare HIXEN telehandlers by rated capacity and lift height to find a model that suits the loads and working areas on your farm.
