HIXEN HX5018 4WD Telehandler

When a truck can unload at ground level but the materials need to go several floors higher, the HIXEN HX5018 4WD telehandler handles both jobs. Its four-section boom reaches up to 17.55 m vertically and 13.08 m forward, giving crews room to work from a setback when access near the building is limited. The machine has a maximum lift capacity of 5,000 kg within the applicable load chart. Four-wheel drive and 380 mm of ground clearance support travel across gravel and unpaved staging areas. A 91 kW Yuchai diesel engine powers the standard build. Order directly from HIXEN and choose the engine, drivetrain options, and attachments that suit your site, daily lifting tasks, and the requirements of your destination market.

HX5018 Load Charts and Machine Dimensions

Fork Load Charts for Lifting on Tires and Stabilizers

Choose the fork load chart that matches the working setup. One covers operation on tires with the levelling device. The other covers operation with the stabilizers lowered. Each shows how much weight the machine can lift at a given height and forward reach. For an elevated pick, use the measured landing height and setback together, then check the load center and attachment against the chart for the quoted machine.

Image captions — HX5018 fork load chart on tires with levelling device · HX5018 fork load chart with stabilizers lowered.

Side View for Machine Length and Approach Clearance

The side view shows a 6.60 m length to the fork carriage and a 7.82 m overall length with forks. Use the full length to check approaches to delivery trucks, loading bays, and staging points. The 3.60 m wheelbase and 380 mm ground clearance also help when reviewing thresholds or changes in the site surface.

Image caption — HX5018 side view showing carriage length, overall length with forks, wheelbase, and ground clearance.

Front View for Gate Width and Overhead Clearance

At 2.35 m wide and 2.65 m high, the HX5018 has defined dimensions you can compare with gates, covered loading areas, and other restricted access points. The 4.10 m external turning radius over the tires helps you assess maneuvering space. Allow room for the selected attachment and load when checking the full route.

Image caption — HX5018 front view showing overall width, overall height, and track width.

HX5018 Optional Configurations

  • Engine and emissions packages. Ask about China Stage II, EU Stage IIIA, EU Stage V, or U.S. EPA Tier 4 Final engine configurations. Share your destination country and required emissions standard so HIXEN can confirm the engine and documents available for your order.
  • Closed-loop hydrostatic transmission. Specify a China-made or Danfoss hydrostatic drive if your fleet calls for one or daily work involves frequent low-speed positioning.
  • ZF-type wet-brake axle. Ask about this option when specifying your axle and brake package. HIXEN can confirm the available combinations with your chosen transmission.
  • Diesel-fired cab heater. Add a fuel-fired heater for machines that regularly work through winter or start shifts in cold conditions.

HX5018 4WD Telehandler Specifications

ParameterSpecification
Maximum lift capacity5,000 kg
Maximum lift height17.55 m
Maximum forward reach13.08 m
BoomFour-section telescopic boom
Overall length to fork carriage6.60 m
Overall length with forks7.82 m
Overall width2.35 m
Overall height2.65 m
Wheelbase3.60 m
Ground clearance380 mm
External turning radius over tires4.10 m
Unladen weight with forks14,100 kg
Fork dimensions1,220 × 125 × 50 mm
Standard engineYuchai YCD4J22T-125
Rated engine power91 kW
Maximum engine torque400 Nm at 1,400 rpm
Standard transmissionTorque converter, four forward and four reverse gears
DriveFour-wheel drive
Maximum travel speed40 km/h
Cab protectionFOPS Level 2

telehandler Attachments

HIXEN supplies pallet forks for packaged materials, buckets for loose bulk loads, bale clamps for agricultural handling, and lifting jibs for suitable suspended loads. Tell us what you handle, how much it weighs, and where it needs to land. We can recommend an attachment and confirm its mounting requirements, hydraulic compatibility, and applicable load chart.

Maintenance and Replacement Wear Parts

Order a maintenance parts package with the machine or request individual replacements when needed. HIXEN supplies items such as fuel, engine oil, air, hydraulic, and transmission filters, along with boom extension, lift, and tilt cylinder seals. Brake components and replacement work lights are also available.

For a replacement quote, send the machine serial number, part number if available, required quantity, and delivery country. A photo of the part or its label can help us identify the correct item for your build.

HX5018 Container Loading

HIXEN can pack one standard HX5018 in a 40HC container, with the cab guard removed for transport. If you are ordering forks, extra attachments, or spare parts with the machine, send the complete order list and destination port so we can confirm the packing layout and quote freight.

Frequently Asked Questions

Can the HX5018 lift 5,000 kg to 17.55 m?
The 5,000 kg rating applies within the marked capacity zone. For a lift near maximum height, check the actual landing height and horizontal reach on the chart for your fitted attachment, load center, and stabilizer setup.

What is the advantage of 4WD on this telehandler?
Four-wheel drive helps maintain traction when the machine travels from a hard loading surface onto gravel or compacted soil. If access is restricted, check the route using the machine dimensions, turning radius, and space needed for the selected attachment.

Can I use forks or a bucket I already own?
Send the attachment model, mounting dimensions, weight, and a photo of the connection points. For powered attachments, include the required hydraulic flow and pressure so HIXEN can review compatibility.

What information do I need for a factory-direct quote?
Include your destination country or port, quantity, heaviest load, required lift height and reach, and preferred attachments. If the machine must work from a fixed setback, include a site photo or drawing with dimensions.

Send Your Inquiry Today

Send Your Inquiry Today

Send Your Inquiry Today