The HIXEN HX3007 telehandler forklift is built for crews that unload materials, move them across a site, and place them at height. Its two-section telescopic boom offers a maximum lift height of 7 m, and the machine has a maximum lift capacity of 3,000 kg. Adjustable pallet forks handle common loads such as building supplies, bagged materials, and palletized stock. Four-wheel drive and 350 mm of ground clearance suit outdoor routes between the unloading area and the point of use. For jobs that involve both lifting and reaching forward, share your load weight and placement dimensions so HIXEN can check the required capacity.
Start with the material you move most often. The HX3007’s 1,220 mm sliding pallet forks can be spaced to suit different pallets, making them a practical choice for unloading trucks, organizing stock, and feeding materials to work areas. When the job changes, a compatible attachment can extend the machine’s use. Ask HIXEN about a bucket for loose bulk materials or a bale-handling attachment for farm work.
If you already own an attachment, send its model number, mounting dimensions, weight, and hydraulic requirements. HIXEN can review compatibility and confirm which carriage, hydraulic connections, and load chart apply to the proposed setup.
At 2.20 m wide and 2.55 m high, the HX3007 gives you specific dimensions to check against gates, shed entrances, and covered loading bays. Its 4.65 m length is measured to the carriage. Allow for the fitted attachment and load when checking aisle space, truck access, or room to turn. The external turning radius over the tires is 4.25 m.
Four-wheel drive, pneumatic tires, and 350 mm of ground clearance support travel across gravel yards and unpaved site routes. The published HX3007 cab configuration includes LED work lights and rear and front-right cameras with an in-cab display. These features help operators see around the machine when reversing or maneuvering near stored materials.
Configure the HX3007 around the loads you handle, the ground you work on, and the market where the machine will operate.
| Parameter | HX3007 Specification |
|---|---|
| Rated load capacity | 3,000 kg |
| Maximum lift height | 7.0 m |
| Maximum forward reach | 3.6 m |
| Overall length to carriage | 4.65 m |
| Overall height | 2.55 m |
| Wheelbase | 3.15 m |
| Ground clearance | 0.35 m |
| External turning radius over tyres | 4.25 m |
| Unladen weight with forks | 7,600 kg |
The HX3007’s available lifting capacity changes with boom angle, extension, load center, and attachment. The 3,000 kg figure is the machine’s maximum lift capacity. To check a specific lift, use the load chart for the quoted configuration at the height and forward reach the job requires.
For example, when placing a pallet over a barrier, measure the horizontal distance from the closest position the machine can safely occupy to the placement point. Send that distance, the placement height, the loaded pallet weight, and its dimensions. These details help HIXEN identify the relevant position on the load chart and recommend a configuration for your job.
HIXEN supplies replacement wear parts for the HX3007 telehandler forklift. You can request a spare parts package with your machine order or contact us later for individual replacements.
Check the load chart for the exact machine and attachment. Give HIXEN your load weight, dimensions, placement height, and horizontal reach so the lift can be checked against the applicable chart.
Compatibility depends on the mounting interface, attachment weight, and hydraulic requirements. Send the attachment model and a photo or drawing of the mounting points for review.
The published machine width is 2.20 m and overall height is 2.55 m. Measure the narrowest opening and check clearances for your selected tires, attachment, load, and approach route.
Start with the destination country and intended application. Add the heaviest load, required lift height and forward reach, preferred attachments, and any engine or cab requirements.
