The HIXEN Wrapped Bale Clamp is a hydraulic telehandler attachment for moving, loading and stacking film-wrapped round bales. Its curved, smooth tubular arms cradle the outside of the bale, helping reduce punctures and scuffs during pickup, transfer and placement. It suits farms and contractors that need to move wrapped silage or haylage from the field to a trailer, storage area or feeding point.
Keeping the film intact matters because tears can let air into a silage bale during storage. The clamp gives operators a broad contact area around the bale and lets them release it from the cab once it is in position.
| Specification | Details |
|---|---|
| Clamp capacity options | 500 kg, 800 kg or 1,200 kg |
| Attachment type | Hydraulic clamp for film-wrapped round bales |
| Arm design | Curved, smooth tubular arms |
| Bale diameter and jaw opening | Confirm for the selected configuration |
| Mount and hydraulic connection | Confirm against the telehandler carriage and auxiliary circuit |
The clamp’s capacity is one limit in the setup. The permissible load also depends on the telehandler’s approved configuration and load chart at the required lift height and forward reach. Share the maximum weight of a wet bale and your typical bale diameter so HIXEN can check the proposed match. If you are buying the attachment with a machine, see the HIXEN HX3507 telehandler and confirm the carriage and hydraulic setup with our team.
Field collection, trailer loading and stack placement can require different boom positions. Include the trailer deck height, planned stack height and any forward reach needed when requesting a fit check.
Measure bale diameter and width across your usual production runs, especially if you use more than one baler. Include the largest diameter and the heaviest bale in your inquiry, even if those measurements come from different batches. If you work in a feed shed or enclosed yard, include the doorway width and available turning space so the machine and attachment can be assessed together.
For existing fleets, check whether the machines use the same carriage and hydraulic couplers before ordering one clamp for multiple units. You can also compare other HIXEN telehandler attachments for your forage handling tasks.
Can the clamp handle both round and square wrapped bales?
The curved arms are intended for round bales. If your operation handles square bales, send their dimensions and loaded weight so HIXEN can check whether a different attachment is suitable.
How do I choose between the three capacity options?
Start with the heaviest bale at its actual handling weight, which can vary with moisture and density. Then confirm that the clamp opens far enough for your bale diameter and that the telehandler can handle the combined setup at the required reach.
Will it fit my current telehandler?
Fit depends on the carriage or quick coupler and the auxiliary hydraulic connection. Send the machine make, model and a clear photo of the carriage. Include the hydraulic coupler details if available.
How can I reduce the chance of film damage?
Keep the contact surfaces clean and check them for rough edges. Align the arms around the bale and follow the equipment instructions for gripping and release. Inspect the film after handling, especially if the bale will go into storage.
Contact HIXEN Machinery for a quote and fit check. Send your telehandler model, carriage photo, bale diameter range, maximum bale weight and intended loading or stacking height. Include your destination country and quantity so we can prepare a quote for the selected configuration.