The HIXEN telehandler 4 in 1 bucket combines loading, grabbing, dozing and grading in one hydraulic attachment. With the jaw closed, it carries loose material like a conventional bucket. The hinged front jaw opens for gripping suitable objects or exposing the rear blade for pushing and leveling material. For crews that switch between handling and ground preparation in the same work area, one attachment can reduce the number of changeovers.
HIXEN lists four width and volume combinations, from 1,650 mm and 1.10 m³ to 2,200 mm and 1.40 m³. Choose the size around your material, carrier and working space.
The bucket consists of a fixed rear section and a pivoting front jaw. The telehandler’s auxiliary hydraulic circuit operates the jaw, while the machine’s tilt function changes the angle of the entire bucket. Independent jaw and tilt movement lets the operator move from carrying a scoop to opening the bucket for discharge without changing attachments.
The steel bucket shown has serrated jaw edges and a profile that brings the front and rear sections together around irregular material. When opened, the bucket exposes a working edge for pushing and spreading loose fill. Confirm the cutting edge and tooth configuration for your order, especially if you expect to work over finished surfaces.
| Bucket width | Listed bucket volume |
|---|---|
| 1,650 mm | 1.10 m³ |
| 1,800 mm | 1.20 m³ |
| 2,000 mm | 1.30 m³ |
| 2,200 mm | 1.40 m³ |
Bucket volume describes how much material fits in the bucket. The allowable load depends on the material’s bulk density and the approved load chart for the machine and attachment at the intended boom position. Confirm the bucket weight, carriage interface, hydraulic connection and configuration before ordering.
Look at the tasks the machine performs most often. When a crew loads loose fill and grades the same yard, compare how often the operator would need to switch between a bucket and a blade. Also check the room available to open the jaw near trailer sides, walls and stockpile bays.
For repeated trailer loading, measure the side height and the required forward reach from the machine’s working position. Include your typical material density so the bucket can be matched to the planned loading cycle.
Will the bucket fit my current telehandler?
Send the machine make, model and a clear photo of the carriage or quick coupler. Include the auxiliary hydraulic connection details if available so HIXEN can review compatibility.
Which width should I choose?
Measure the narrowest access point and allow clearance for turning and for the jaw to open. Compare the listed volume with the weight of the material you plan to carry at the required height and reach.
When should I choose a dedicated bucket instead?
If most of the work is moving light bulk grain or digging in compacted ground, compare the appropriate dedicated option in the HIXEN telehandler attachment range. A 4 in 1 bucket is most useful when you need several functions during the same job.
Contact HIXEN Machinery for a quote and fit check. Send your telehandler model, carriage photo, preferred bucket width and the materials and tasks involved. Include your destination and quantity so the quote can cover the proposed configuration.