Telehandler Tooth Bucket

Unit Located At

Quick Overview

  1. Condition:New
  2. Customization: Supported
  3. spare parts: provided
  4. Shipping Port: Qingdao
  5. Price:Negotiation
  6. Warranty:  12 Months
  7. Payment: All accepted
  8. Shipping: Sea or Land Freight

What Is a Telehandler Tooth Bucket?

The HIXEN Telehandler Tooth Bucket is a boom-mounted digging and loading attachment with teeth along its front edge. The tooth tips concentrate contact as the bucket enters a pile or breaks into loose ground. Once the material is in the bucket, the shell and sidewalls hold it for transport or loading. This attachment suits site preparation and bulk material handling with a compatible telehandler, including jobs that alternate between scooping from a stockpile and placing material into a truck or hopper.

Key Features of the Toothed Digging Bucket

  • Toothed leading edge. The teeth help the bucket enter coarse stockpiles, loose soil and suitable backfill. Check the tooth profile and replacement part references if you routinely handle abrasive material.
  • Enclosed bucket shell. The floor, back and sidewalls hold loose material during handling. The front and side photos show the shape of the shell and the position of the teeth along the lip.
  • Five width and volume combinations. Choose a bucket based on the loads your machine can handle and the space available at pickup and discharge. Check both the bucket width and the clearance around the receiving truck or hopper.
  • Carrier-specific fitment. Submit your boom-end coupler photos and machine details so HIXEN can check the mounting interface and locking arrangement before quoting the attachment.

Telehandler Tooth Bucket Specifications

Bucket width Listed bucket volume
1,650 mm 1.1 m³
1,800 mm 1.2 m³
2,000 mm 1.3 m³
2,200 mm 1.4 m³
2,600 mm 1.8 m³

Bucket volume describes the space available for material. The actual load weight depends on bulk density and fill level. Wet soil and dense aggregate can reach the machine’s permissible load before the bucket is full. For the exact configuration, confirm the empty attachment weight, the volume measurement basis and the applicable carrier load chart. Check the chart for the planned boom position, reach and discharge height.

If you are replacing an existing bucket, include the dimensions and photos of its mounting points, along with the machine serial number. Attachments with similar widths may have different coupler geometry. Ask for a dimensioned drawing and confirm the tooth configuration before ordering, especially if your fleet already stocks specific wear parts.

Suitable Industries and Jobsite Tasks

  • Construction and site preparation. Scoop loose spoil, topsoil or approved backfill from a staged pile and transfer it to a truck or drop point. Tell HIXEN if the job involves shallow cuts or picking up material from an already loosened pile.
  • Aggregate and landscape supply yards. Load suitable gravel, crushed stone or screened soil from stockpiles into bins or trailers. Choose the bucket around your heaviest regular material and the width of the receiving opening.
  • Farm and facility maintenance. Move suitable fill for yard repairs or load loose soil during drainage and access improvements. Check the approach space if the carrier needs to work around gates, walls or stored equipment.
  • Rental and dealer fleets. Use the machine and attachment identification when assigning buckets to jobs. Keep the coupler details and tooth part references with the fleet records to simplify matching and service.

Choosing a Bucket for Your Loading Cycle

Work backward from the receiving vehicle or hopper. Record the sidewall height, the available approach space and how far the load must reach into the opening. Then describe the stockpile, including the typical particle size and whether the material arrives loose or compacted. When comparing quotes, ask for the bucket’s empty weight and overall dimensions so your team can assess the expected payload and loading clearances for each size.

Frequently Asked Questions

When should I choose a tooth bucket?
Choose a toothed edge when the bucket needs to enter a coarse pile or bite into suitable ground. For tasks such as smoothing loose material or scraping a finished surface, compare a smooth-edge bucket in the HIXEN telehandler attachment range.

Can I order replacement teeth?
Share your bucket identification, tooth photos and any readable markings so HIXEN can confirm the matching parts and availability. The tooth style and fastening details should match the actual bucket configuration.

How do I choose the right bucket size?
Start with the usual material, its density, the required discharge height and reach, and the narrowest part of the working area. Check the carrier’s attachment-specific load chart before selecting a width and volume.

Request a Telehandler Tooth Bucket Quote

Contact HIXEN for a toothed bucket quote. Include your telehandler make, model and serial number, clear coupler photos, preferred bucket width, material type, discharge height and reach, order quantity and destination. If you are buying a carrier and bucket together, review the HIXEN construction telehandler range and ask which bucket sizes, mounting arrangements and load charts apply to the proposed machine.

Send Your Inquiry Today

Related Products

Send Your Inquiry Today

Send Your Inquiry Today