Telehandler Pallet Fork

Unit Located At

Quick Overview

  1. Condition:New
  2. Customization: Supported
  3. spare parts: provided
  4. Shipping Port: Qingdao
  5. Price:Negotiation
  6. Warranty:  12 Months
  7. Payment: All accepted
  8. Shipping: Sea or Land Freight

HIXEN Telehandler Pallet Forks are a boom-mounted attachment for picking up, moving and placing pallets, crates and skids. Two parallel tines support the load from underneath, while the telehandler provides the lift height and forward reach to place it. Use these forks for palletized building supplies, farm inputs and industrial goods that need to move between a delivery vehicle, a staging area and an approved landing point.

Key Features of HIXEN Telehandler Pallet Forks

  • Two-tine support for palletized loads. The paired tines enter pallet openings or skid pockets. Their length, width and spacing should suit the base of the load and the available clearance.
  • Fork carriage matched to the machine. Order against the actual boom-end coupler and locking arrangement. HIXEN can review your carrier model and mounting photos before quoting.
  • Suitable for loading and placement. The same attachment can serve both unloading and elevated placement on a compatible machine. Check capacity separately for the pickup and landing positions because forward reach and boom angle affect the permissible load.
  • Clear scope for replacement orders. Specify whether you need replacement tines for an existing carriage or a complete fork-and-carriage assembly. Send a photo of the current setup and any readable identification marks.

Pallet Fork Specifications and Compatibility

The HIXEN HX4007 and HX5014 specification sheets list the following tine dimensions. These are reference dimensions for the documented configurations. Confirm the part and interface for the serial number of your machine before ordering.

HIXEN reference model Tine length × width × section thickness
HX4007 1,220 × 125 × 50 mm
HX5014 1,220 × 125 × 50 mm

For a fitment check, provide the coupler or carriage type, fork pocket dimensions, desired tine spacing, maximum loaded pallet weight and the load center. The load center is the horizontal distance from the vertical fork face to the load’s center of gravity. A deep skid or unevenly loaded pallet can move that center farther forward. Ask for the fork assembly rating and the load chart for the exact machine and attachment configuration.

If you are replacing worn forks, photograph the existing tines where they attach to the carriage and include any stamped markings in your inquiry. If you are ordering a new assembly, include the width between the carriage mounting points and a straight-on photo of the boom-end interface. Confirm whether the quoted assembly includes the carriage and locking hardware.

Industries and Common Jobsite Tasks

  • Building construction: Unload palletized blocks, bagged mortar or boxed building products at a staging area. For elevated deliveries, specify the landing height and the horizontal distance from the machine’s setup position.
  • Agriculture and farm supply: Move palletized seed, feed and fertilizer between a delivery truck and covered storage. Share the pallet base dimensions and loaded weight when ordering forks for mixed farm inventory.
  • Industrial yards and logistics: Transfer crated parts and palletized stock between flatbeds, storage areas and receiving points. Confirm that the tines can enter the pallet openings and that the load fits the available clearance at pickup and placement.
  • Rental and dealer fleets: Keep a record of compatible machines, carriage types and applicable load charts so dispatch staff can match the attachment to the customer’s job and machine.

Frequently Asked Questions

Will these pallet forks fit my telehandler?
Fitment depends on the machine model and its carriage or coupler. Share the model, serial number and photos of both sides of the attachment interface. Similar-looking mounts can have different dimensions or locking details.

How much can the forks lift?
Check the fork assembly rating at the specified load center and the carrier’s approved load chart for the actual boom position, reach and support setup. Stay within the lower applicable limit. A machine’s headline maximum capacity alone cannot tell you what it can lift at the required position.

How do I choose the right tine length?
Measure the pallet or skid in the direction of entry, along with the pocket width and height. Include any clearance behind the load and the weight distribution. HIXEN can review those details against the proposed fork configuration.

When should I ask for a fork positioner?
If your team handles several pallet widths in one shift and changes tine spacing frequently, ask about a compatible fork positioner. Compare the required spacing range and the approved machine configuration in the HIXEN telehandler attachment range.

Request a Telehandler Pallet Forks Quote

Contact HIXEN for a pallet fork quote with your machine model, coupler photos, preferred fork dimensions, maximum load weight, required lift height and forward reach. Include your quantity and destination country or port. For a machine-and-fork package, you can also review the HIXEN HX5014 telehandler and ask which carriage, forks and load chart are included in the quote.

Send Your Inquiry Today

Related Products

Send Your Inquiry Today

Send Your Inquiry Today