Telehandler Grain Bucket

Unit Located At

Quick Overview

  1. Condition:New
  2. Customization: Supported
  3. spare parts: provided
  4. Shipping Port: Qingdao
  5. Price:Negotiation
  6. Warranty:  12 Months
  7. Payment: All accepted
  8. Shipping: Sea or Land Freight

Grain Bucket for Telehandler Loading and Handling

The HIXEN grain bucket for telehandler loading is an agricultural attachment for scooping, moving and dumping loose grain and feed ingredients. Its deep body and solid sidewalls help contain free-flowing material such as wheat, barley and corn as the machine moves between a storage pile and a trailer or hopper. The flat leading edge is suited to gathering grain from a paved yard or a flat storage floor.

Five width and volume combinations cover different site layouts, from narrower entrances to open loading areas. The right size depends on the bulk density of the material, the space available to maneuver, and the capacity of the telehandler at the required dumping height and reach.

Key Features of the Telehandler Grain Bucket

  • Deep profile with solid sidewalls. The bucket is shaped to carry loose bulk material and limit spillover at the sides during short transfers between the pile and the discharge point.
  • Flat leading edge. The open front and straight edge make it easier to collect the remaining grain on a flat floor at the end of a loading run.
  • Five width and volume options. Match the bucket to the working space, material density and desired scoop size. A wider bucket can collect more per pass where access and the machine’s load chart allow it.
  • Works with the telehandler’s boom and tilt functions. A compatible machine can raise and tip the bucket into an open trailer, receiving hopper or feed mixer within the approved operating envelope.

Grain Bucket Specifications

Bucket width Listed bucket volume
1,650 mm 1.70 m³
1,800 mm 1.90 m³
2,000 mm 2.15 m³
2,200 mm 2.35 m³
2,400 mm 2.55 m³

Confirm the selected bucket’s empty weight and mounting interface when ordering. To estimate material weight, multiply the volume you expect to carry by the material’s bulk density. Check the resulting load against the approved chart for the machine and attachment at your intended boom position. Grain type and moisture can change the weight of a scoop of the same volume.

Industries and Work Scenarios

  • Grain farms and cooperatives. Move harvested grain from a covered floor store to a trailer or receiving hopper. Check bucket width against shed openings and leave enough room for the machine to turn and line up.
  • Feed mills and ingredient handling sites. Transfer loose feed ingredients between storage bays and intake hoppers. Check the lip height and opening width of the hopper against the bucket’s discharge path.
  • Dairy and livestock farms. Load grain and compatible loose ingredients into a feed mixer or wagon. Choose a width that suits the mixer opening and the available space around it.
  • Grain storage and distribution yards. Load bulk trailers for dispatch or consolidate remaining grain from flat storage areas. Include trailer wall height and forward reach in your machine and attachment review.

If you are sourcing both the carrier and the bucket, see HIXEN’s agricultural telehandlers and share your loading layout with our team.

Match the Bucket to Your Loading Site

Measure the narrowest point between the grain pile and the discharge area. Account for clearance on both sides of the bucket, especially around door frames and partitions. Then check the space needed to turn and approach the trailer or hopper.

For mixed grain and feed work, use the densest material you routinely handle when comparing sizes. If that material limits the usable fill, a smaller bucket may suit the job and leave more clearance around the loading area.

Frequently Asked Questions

Which bucket size should I choose for my telehandler?
Start with the narrowest access point, the required dump height and the heaviest material you plan to move. Then compare bucket widths and volumes with the machine’s approved load chart for the intended lift height and forward reach.

Will this grain bucket fit my current machine?
Fit depends on the telehandler model and carriage or quick coupler. Send a clear photo of the carrier interface and any relevant mounting dimensions so HIXEN can review the combination.

Can I use it for wet grain or other bulk materials?
Tell us the material and its expected bulk density. Moisture and denser materials increase the weight per scoop, so the allowable fill may be lower. For digging or abrasive materials, review the alternative telehandler attachments first.

How do I check that the bucket clears my trailer?
Measure the top of the trailer side and the horizontal distance from the machine’s working position to the intended discharge point. Allow room for the bucket lip to clear the side as it tips.

Request a Grain Bucket Quote

Contact HIXEN Machinery for a grain bucket quote and compatibility check. Include your telehandler model, carriage photo, material, preferred bucket width and required dump height and reach. Share your destination and quantity so we can quote the proposed configuration.

Send Your Inquiry Today

Related Products

Send Your Inquiry Today

Send Your Inquiry Today