The HIXEN HX3510 is built for jobs where a delivery truck can get close to the site, but the materials still need to go farther or higher. Its three-section boom reaches up to 10 m vertically and 6.4 m forward, giving crews more flexibility when feeding raised work areas or placing pallets beyond the unloading point. With a maximum lift capacity of 3,500 kg and a body 2.20 m wide, it suits construction sites, agricultural yards, and equipment fleets that need reach within limited access routes. Four-wheel drive supports travel between work areas, while interchangeable attachments let you configure the machine around the materials you handle. Order directly from HIXEN with the engine, drivetrain, and equipment options your market requires.
Standard Equipment :
Optional Equipment :
| Parameter | Specification |
|---|---|
| Maximum lift capacity | 3,500 kg |
| Maximum lift height | 10.0 m |
| Maximum forward reach | 6.4 m |
| Boom | Three-section telescopic boom |
| Overall length to carriage | 5.80 m |
| Overall width | 2.20 m |
| Overall height | 2.55 m |
| Wheelbase | 3.15 m |
| Ground clearance | 350 mm |
| External turning radius over tires | 4.25 m |
| Unladen weight with forks | 9,500 kg |
| Fork dimensions | 1,220 × 125 × 50 mm |
| Standard tires | 16/70-20 pneumatic |
| Standard engine | Yuchai YCD4M22T-105 |
| Rated engine power | 77.3 kW |
| Standard transmission | Torque converter |
| Drive | Four-wheel drive |
| Maximum travel speed | 35 km/h |
HIXEN supplies pallet forks for unit loads, buckets for loose materials, bale clamps for agricultural work, and lifting jibs for compatible suspended loads. Tell us what you handle and how much it weighs. We can recommend an attachment size, check mounting and hydraulic compatibility, and identify the applicable load chart.
A 20GP container takes one standard HX3510 with all four tires, the cab guard, and the quick coupler removed. A 40HC container takes two standard units without that disassembly. Send your order quantity, destination port, and attachment list so HIXEN can confirm the loading plan and quote freight for your order.
Tell us where the machine will work and what it needs to lift. Include your destination country or port, order quantity, heaviest load, required lift height and forward reach, and preferred attachments. If your work area has a restricted entrance or the machine must stand back from the landing point, include a photo or site drawing with dimensions. We can review the job and quote the machine, options, and shipping together.
Can the HX3510 lift 3,500 kg to 10 m?
The 3,500 kg maximum applies within the marked zone on the fork chart with the stabilizers lowered. For a lift near 10 m, check the capacity at your exact height and forward reach using the chart for the fitted attachment, load center, and machine setup.
Can I use a bucket or forks I already own?
Send the attachment model, weight, and mounting dimensions or photos of the connection points. For a powered attachment, include its hydraulic flow and pressure requirements. HIXEN can review compatibility before you finalize the order.
How much does the HX3510 cost?
The quote depends on the engine, drivetrain, selected attachments, order quantity, and delivery terms. Share your preferred configuration and port so HIXEN can quote the build and freight for your order.
Can I buy replacement parts with the machine?
Yes. Ask HIXEN to include maintenance and wear parts such as filters, seal kits, and hoses. Dealers can also request a recommended parts list when placing an initial order.