The HIXEN HX5010 is a heavy-duty telescopic telehandler for crews that unload trucks, move dense palletized materials, and feed raised work areas throughout the day. Its two-section boom reaches up to 9.8 m vertically and 5.4 m forward, with a maximum lift capacity of 5,000 kg within the applicable load chart. This combination suits many low-rise construction projects, including buildings of around three stories where actual landing heights and setbacks fall within the machine’s working range. A 91 kW Yuchai diesel engine and four-wheel drive support daily work across construction sites, industrial yards, and agricultural facilities.
| Parameter | Specification |
|---|---|
| Maximum lift capacity | 5,000 kg |
| Maximum lift height | 9.8 m |
| Maximum forward reach | 5.4 m |
| Boom | Two-section telescopic boom |
| Overall length to fork carriage | 6.40 m |
| Overall width | 2.35 m |
| Overall height | 2.55 m |
| Wheelbase | 3.60 m |
| Ground clearance | 380 mm |
| External turning radius over tires | 4.10 m |
| Unladen weight with forks | 12,800 kg |
| Fork dimensions | 1,220 × 125 × 50 mm |
| Standard engine | Yuchai YCD4J22T-125 |
| Rated engine power | 91 kW |
| Maximum engine torque | 400 Nm at 1,400 rpm |
| Standard transmission | Torque converter, four forward and four reverse gears |
| Hydraulic pump | Gear pump |
| Drive | Four-wheel drive |
| Maximum travel speed | 40 km/h |
HIXEN supplies pallet forks for packaged loads, buckets for loose material, bale clamps for farm work, and lifting jibs for compatible suspended loads. Tell us what you handle, its weight and dimensions, and where it needs to go. We can recommend an attachment and confirm the mounting requirements and applicable load chart.
Send us your destination country or port, order quantity, heaviest load, landing height, forward reach, and preferred attachments. For a low-rise project, add a photo or drawing that shows where the machine can stand and where the load needs to land. HIXEN can review the lift and quote the machine, factory options, and shipping together.
Can the HX5010 lift 5,000 kg to its maximum height?
The 5,000 kg rating applies within the marked capacity zone for the machine setup. For a high lift, check the exact height, forward reach, load center, and attachment against the applicable chart. Ask HIXEN for the chart that matches your quoted configuration.
Can the HX5010 reach the third floor?
It can suit some three-story projects. Floor heights and site setbacks vary, so measure from the machine’s standing surface to the point where the load will be placed. A raised landing may be within vertical reach while the required setback still limits the usable capacity.
Should I choose the HX5010 or HX5014?
Both have a 5,000 kg maximum lift capacity. The HX5010 reaches up to 9.8 m vertically, while the HX5014 reaches up to 13.8 m. Compare their load charts at your actual working height and reach, then request quotes for the same engine and attachment requirements. HIXEN 5-ton telehandler range
Can I order spare parts with the machine?
Yes. Ask HIXEN to include a maintenance and wear parts package with your quote. Available items include filters, seal kits, and hoses. Dealers can also request a recommended parts list for local stock.