The HIXEN Telehandler Tooth Bucket is a boom-mounted digging and loading attachment with teeth along its front edge. The tooth tips concentrate contact as the bucket enters a pile or breaks into loose ground. Once the material is in the bucket, the shell and sidewalls hold it for transport or loading. This attachment suits site preparation and bulk material handling with a compatible telehandler, including jobs that alternate between scooping from a stockpile and placing material into a truck or hopper.
| Bucket width | Listed bucket volume |
|---|---|
| 1,650 mm | 1.1 m³ |
| 1,800 mm | 1.2 m³ |
| 2,000 mm | 1.3 m³ |
| 2,200 mm | 1.4 m³ |
| 2,600 mm | 1.8 m³ |
Bucket volume describes the space available for material. The actual load weight depends on bulk density and fill level. Wet soil and dense aggregate can reach the machine’s permissible load before the bucket is full. For the exact configuration, confirm the empty attachment weight, the volume measurement basis and the applicable carrier load chart. Check the chart for the planned boom position, reach and discharge height.
If you are replacing an existing bucket, include the dimensions and photos of its mounting points, along with the machine serial number. Attachments with similar widths may have different coupler geometry. Ask for a dimensioned drawing and confirm the tooth configuration before ordering, especially if your fleet already stocks specific wear parts.
Work backward from the receiving vehicle or hopper. Record the sidewall height, the available approach space and how far the load must reach into the opening. Then describe the stockpile, including the typical particle size and whether the material arrives loose or compacted. When comparing quotes, ask for the bucket’s empty weight and overall dimensions so your team can assess the expected payload and loading clearances for each size.
When should I choose a tooth bucket?
Choose a toothed edge when the bucket needs to enter a coarse pile or bite into suitable ground. For tasks such as smoothing loose material or scraping a finished surface, compare a smooth-edge bucket in the HIXEN telehandler attachment range.
Can I order replacement teeth?
Share your bucket identification, tooth photos and any readable markings so HIXEN can confirm the matching parts and availability. The tooth style and fastening details should match the actual bucket configuration.
How do I choose the right bucket size?
Start with the usual material, its density, the required discharge height and reach, and the narrowest part of the working area. Check the carrier’s attachment-specific load chart before selecting a width and volume.
Contact HIXEN for a toothed bucket quote. Include your telehandler make, model and serial number, clear coupler photos, preferred bucket width, material type, discharge height and reach, order quantity and destination. If you are buying a carrier and bucket together, review the HIXEN construction telehandler range and ask which bucket sizes, mounting arrangements and load charts apply to the proposed machine.