HIXEN HX6018 Large Telehandler

The HIXEN HX6018 is a large telehandler for contractors, rental fleets and equipment dealers who need to place heavy materials at height or across a setback. Its four-section telescopic boom reaches up to 17.60 m vertically and 13.08 m forward. Maximum lift capacity is 6,000 kg within the applicable load chart. Use the HX6018 to shortlist a machine for jobs such as setting palletised building materials onto an elevated deck or replenishing stock at an outdoor industrial yard.

HX6018 Load Charts and Machine Dimensions

Check capacity at your actual working position

Start with the total load weight, the height of the landing point and the forward reach required from the proposed machine position. Include the load dimensions and centre of gravity if you handle long packs or uneven loads. Ask HIXEN for the HX6018 load chart that matches the attachment and machine configuration, including the stabiliser setup where applicable. The maximum capacity, lift height and forward reach describe different points in the working envelope. Check the allowable load at the planned height and reach together.

Allow space for access and setup

The machine measures 6.90 m to the fork carriage and 8.12 m to the fork face. Its 2.70 m width and 2.76 m height are useful starting points when checking gates and covered entrances. The external turning radius over the tyres is 4.10 m. Leave additional space for the selected attachment and the load, especially where a delivery route turns between buildings or storage racks.

See the HIXEN telehandler catalogue for the HX6018 dimensions and request the chart for the configuration you intend to buy.

Engine, Cab and Configuration Options

HIXEN lists a 110 kW Yuchai diesel engine for the HX6018. In your enquiry, specify the destination and required emissions standard so the sales team can confirm the engine and documentation available for that market. For jobs that run across multiple shifts or seasons, list the cab equipment you need, such as heating and air conditioning, cameras and work lights. Ask for a written configuration sheet that identifies what is included in the quoted build.

Dealers and rental fleets can also send their preferred attachment package and service parts list with the machine order. If the HX6018 will join an existing fleet, provide the attachment interface and any required hydraulic specifications so HIXEN can review interchangeability.

H6018 Telehandler Specs

ParameterHX6018
Maximum lift capacity6,000 kg
Maximum lift height17.60 m
Maximum forward reach13.08 m
BoomFour-section telescopic boom
Length to fork carriage6.90 m
Length to fork face8.12 m
Overall width × height2.70 × 2.76 m
Wheelbase3.60 m
Ground clearance500 mm
External turning radius over tyres4.10 m
Unladen weight with forks17,000 kg
Standard tyre size17.5-25
Fork dimensions1,220 × 125 × 50 mm
Listed engine110 kW Yuchai diesel

 

Compare 18m telehandlers

Compare the HX4018, HX5018 and HX6018 if your jobs have similar lift heights but different load weights. Their maximum capacities are 4,000 kg, 5,000 kg and 6,000 kg respectively. For a mixed fleet, start with the most frequent jobs and pick the model whose chart covers those lifts while fitting through the available access points. Explore the HIXEN 18 m telehandler range to compare models before asking for a quote.

HX4018 Telehandler

HX5018 Telehandler

HX6018 Telehandler

Telehandler Attachments

Start with pallet forks for supported loads such as boxed materials and palletised supplies. For bulk material, ask for a suitable bucket. For an intended suspended lift, request a compatible lifting hook or jib and its applicable load chart. The examples below show options from the HIXEN range.

Browse HIXEN telehandler attachments and send the item you need, the material you handle and the dimensions of your typical load. If you already own an attachment, include its identification plate and photos of the mounting points.

Maintenance and Replacement Parts

Specify a service parts package with your machine if it will work far from your workshop or serve as a rental fleet unit. Ask for a list of filters, cylinder seal kits, brake parts and electrical items that match the quoted build. Check the packing list for included items and use the machine manual to plan maintenance intervals.

For replacements, share the model, machine serial number, component number if available and delivery country. A clear photo of the component and its label helps identify the correct item when multiple versions are in service. See HIXEN telehandler parts for examples and parts enquiries.

HX6018 Shipping and Delivery

The HX6018 weighs 17,000 kg unladen with forks. Ask for the packed dimensions and shipping weight of the actual order before booking freight. These depend on the supplied attachments and how the machine and accessories are prepared for transport.

Send your destination port, quantity and complete attachment list. HIXEN can review the shipment and confirm the packing plan and quotation for your order. For inland delivery, check unloading space, vehicle access and any height or width restrictions at the receiving site.

FAQs

Can the HX6018 lift 6,000 kg to 17.60 m?

The 6,000 kg figure is the maximum lift capacity within the applicable load chart. To determine capacity at a high landing, check the exact height and forward reach on the chart for the quoted machine and attachment setup.

When should I choose the HX6018 over the HX5018?

Start with the HX6018 if your application calls for a higher maximum capacity rating. Compare both load charts at your most demanding working position and check that the machine can fit through the site’s access points with the proposed attachment.

What determines the price of a large telehandler?

The quoted build, engine package and attachments determine the machine price. Shipping costs depend on the destination and packing plan. Ask for a quote that lists the machine configuration, options and shipping terms so you can compare offers on the same basis.

What should I send for an HX6018 quote?

Send your destination, quantity, heaviest load, lift height, forward reach and preferred attachments. A site sketch showing the proposed position of the machine and the landing point can help if the machine must work from a fixed setback.

Request a Factory-Direct HX6018 Quote

Send Your Inquiry Today

Send Your Inquiry Today